Ultra-Prop Kit Components
| Model No. | Blades | Pitch Blocks | Hubs | A/N Hardware | Hub Spacers |
| 102 | 2 | 2 pair | 1 pair | 4 sets | |
| 103 | 3 | 3 pair | 1 pair | 6 sets | |
| 104 | 4 | 4 pair | 1 pair | 8 sets | |
| 105 | 5 | 5 pair | 1 pair | 10 sets | 1 set |
| 106 | 6 | 6 pair | 1 pair | 12 sets | 1 set |
Ultra-Prop Kit Prices
| 2-Blade Kit (Model 102) | 5.0 lb | $250.00 |
| 3-Blade Kit (Model 103) | 6.5 lb | $300.00 |
| 4-Blade Kit (Model 104) | 8.0 lb | $350.00 |
| 5-Blade Kit (Model 105) | 11.0 lb | $440.00 |
| 6-Blade Kit (Model 106) | 13.0 lb | $495.00 |
Individual Component Prices
| Ultra-Prop Blades | each, specify LH (P) or RH (T) | $75.00 |
| Flange Kit | Kit includes flange to match the Ultra-Prop hub, taper locking QD bushing, propeller back-up plate, all hardware and key for straight shafts with 1/4" keyway. Specify shaft diameter. | $85.00 |
| Tiny-Tach | New model TT2A. Universal digital tachometer. One unit. | $54.00 |
| Pitch Blocks | pairs only available in 1° increments - 8°-18° |
$7.00 |
| Hub Halves | each specify 2, 3, 4 blades |
$35.00 |
| Hub Plates | each, specify 5 or 6 blade (does not include hub spacers) specify 2, 3, 4 blades |
$45.00 |
| Hub Spacers | Six, 5/16" ID x 5/8" OD x 1.85" long steel spacers for 5 and 6 blade propellers | $18.00 |
| Propeller Protractor | Kit includes Digital Angle Cube, Protractor Clip, and four Spirit Levels. | $95.00 |
| Angle Cube | Resolution and Repeatability: 0.05 deg, Accuracy +/- 0.1 deg. Standard 9 volt battery. Magnetic base. | $60.00 |
| Protractor Clip | Universal clip, plastic with spirit level. | $45.00 |
| Spirit Level | 10 x 10 x 29 mm with 3M Scotch, reusable adhesive strip on one side. | $3.00 |
| A/N Hardware Packs | each 2 sets per pack (2 bolts, 2 nuts & 4 washers) |
$4.00 |
| Bolt Sleeves | 1 set of 6 per pack 1/4' I.D. |
$2.00 |
| Spinner Kit | Kit includes white polyester spinner, mounting bracket, and all extra hardware for installation. Specify Quicksilver MX belt drive type with 1/4 inch mounting hardware or Rotax gear drive with 5/16 or 8 mm mounting hardware. | $60.00* |
| Spinner | White polyester spinner only (bracket required to install). | $40.00 |
| Spinner Bracket | Spinner mounting bracket only. Specify Quicksilver MX belt drive type with 1/4 inch mounting hardware or Rotax gear drive with 5/16 or 8 mm mounting hardware. | $20.00 |
*$50.00 when ordered with propeller kit
Ordering Information
The Ultra-Prop and all above components and kits can be ordered through Competition Aircraft by phone, e-mail, fax, or by mail. If you need assistance in selecting the best Ultra-Prop propeller for your ultralight aircraft or airboat application, please contact us and be sure to provide the following information.Special notes:
We accept Mastercard, Visa, Discover Card, and American Express as well as personal checks and Paypal orders.
